Konnwei KW600 Digital 12v Battery Tester

KW600 Automotive Digital 12v Battery tester comes with a set of features which are useful for the overall understanding of the battery health. It checks not only for the voltage but also for the CCA which defines the ability of the battery to start a vehicle, Internal Resistance which helps to decide how much charge it can store. These features make it an all-rounder for battery testing.

KW600 Automotive Digital 12v Battery Tester parameters:

Specifications:

1.Measure Standard

2.CCA:100-2000

3.BCI:100-2000

4.CA:100-2000

5.MCA:100-2000

6.JIS:26A17-24SH52

7.DIN:100-1400

8.IEC:100-1400

9.EN:100-2000

10.SAE:100-2000

11.GB:100-1400

12.System Voltage:12 Volts

13.Input Voltage Range:8V-16V

14.Power Requirements: No internal batteries required.

15.Power on when hooked up during testing.

16.Operating Temperature:0℃-50℃

Key functions and features:

1. System voltage: 12 Volts
2. Test Result: Good, Recharge or Replace
3. Life in percentage (%)
4. Cranking system
5. Charging system
6. Internal resistance value (mΩ)
7. Voltage test in a waveform
8. Record and re-play battery data, Life-time free update service
9. Battery test, cranking test, charging test and other additional functions.
10. Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

Application:

Use a test a wide range of 12v batteries(Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded),

VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM),EFB and GEL Cell.

The major battery standards CCA, SAE, CA, EN, BCL, GB, MCA, JIS, DIN and IEC are supported.

Package includes:

1*KW600 Automotive Digital 12v Battery Tester

1*Mini USB cable

1*User’s Manual