Rislone One Seal

Use When You Notice…

• Oil spots under your parked car: Worn seals and gaskets are the most common cause in high-mileage vehicles. This car leak sealant conditions and swells seals back to working size progressively over 100–500 km.
• Oil level dropping between services: Internal seepage in ageing engines responds well to progressive seal conditioning — topping up alone does not fix the underlying wear.
• Tappet noise or ticking on cold starts: Degraded oil film causes metal-on-metal contact at the valve train — treatment quickly restores protective viscosity and quietens ticking.
• Stiff gear changes or a gearbox leak: Works as a gearbox sealant and lubricant conditioner for both manual and automatic transmissions, reducing friction and sealing minor leaks.
• Unknown service history on a used vehicle: Ideal after purchasing a second-hand car — clears accumulated sludge and conditions seals worn by neglected oil changes.

Key Benefits

• Wear Protection in Indian Heat: Anti-wear agents maintain a strong oil film even when ambient temperatures exceed 45°C, protecting high-mileage Maruti, Hyundai, Tata, and Honda engines.
• Progressive Seal Conditioning: Seals worn oil gaskets and O-rings common in high-mileage Indian vehicles without over-swelling or damaging seal materials.
• Sludge and Varnish Removal: Cleans deposits built up from extended oil-change intervals and dusty Indian operating conditions, restoring oil flow to critical engine passages.
• Multi-System Coverage: One Seal stop leak treatment works in the engine, gearbox, and aftermarket power steering — reducing the need for multiple products.
• Broad Oil Compatibility: Safe with all standard Indian engine oil grades and both petrol and diesel engines, including BS6-compliant vehicles.

The Technology Inside

Rislone One Seal combines a blend of viscosity improvers, polar anti-wear additives, and elastomer conditioners that work together from the moment they enter your oil system. The seal conditioners are petroleum-based, not solvent-based, so they restore seal pliability gradually rather than causing rapid over-swelling that can worsen leaks. Viscosity index improvers stabilise oil film thickness across the wide temperature swings typical of Indian driving — from a cold morning start in a Delhi winter to sustained idling in Bengaluru summer traffic. Detergent-dispersant chemistry lifts varnish and sludge into suspension, where your existing oil filter captures it safely. Trusted by Indian mechanics and workshops, this formulation is designed to handle the accelerated oil degradation caused by abrasive road dust that bypasses air filters on Indian highways and city roads.

Dosage & Coverage

Add Rislone One Seal directly through the engine oil filler cap — one bottle treats engines of up to approximately 5–6 litres oil capacity, making it suitable for most Indian passenger cars and SUVs including the Kia Seltos, Tata Punch, Tata Nexon, and BMW M5. Use at every oil change or as a mid-interval supplement when symptoms appear. Always check the dipstick after adding to confirm total oil level remains within the safe upper and lower marks.

Compatibility

Safe to use with

• All petrol and diesel engines — naturally aspirated and turbocharged, BS4 and BS6.
• Mineral, semi-synthetic, and full-synthetic engine oils in grades 5W-30, 10W-40, 15W-40, and 20W-50.
• Manual and automatic gearboxes and aftermarket power steering systems.
• CNG- and LPG-converted engines, where valve and ring wear is accelerated.
• High-mileage Maruti Suzuki, Hyundai, Tata, Honda, Mahindra, Toyota, and Kia vehicles.

Not suitable for

• Not a replacement for engine oil — always use alongside your regular engine oil, never instead of it.
• Not intended to fix cracked blocks, blown head gaskets, or severely damaged seals requiring mechanical repair.
• Do not use in engines where the manufacturer explicitly forbids oil additives under an active warranty.
• Not a substitute for routine oil changes — complement good maintenance, do not replace it.

Why It Matters in India

India's roads are uniquely demanding: speed breakers every few hundred metres, sustained stop-go traffic in Delhi, Mumbai, and Bengaluru, and ambient temperatures that push engine oil beyond its rated limits in May and June. India's ageing car fleet — with millions of vehicles running beyond 10 years and common extended oil-change intervals — means accumulated sludge and worn seals are widespread problems. For owners of used cars, shared taxis, or CNG-converted vehicles, Rislone One Seal offers an affordable path to extending engine life in Indian driving conditions without workshop downtime or expensive overhauls.

How To Use

1. Warm the engine for 2–3 minutes, then switch off and allow it to cool slightly.
2. Pour the entire bottle through the engine oil filler cap.
3. Check the dipstick — confirm total oil level stays within the safe range.
4. Drive normally; the treatment works progressively across the full oil-change interval.

Safety note: Do not overfill the engine beyond the maximum dipstick mark. If the existing oil level is already at maximum, drain a small amount before adding.

Frequently Asked Questions

Can I use Rislone One Seal in a CNG or LPG converted engine?

Yes — CNG and LPG conversions run hotter and place greater stress on valve seats, rings, and seals. Rislone One Seal's anti-wear and seal conditioning chemistry is well-suited to these applications and can help slow the accelerated wear common in converted engines.

How long does it take to see results?

Tappet noise and engine smoothness improvements are often noticed within a few hundred kilometres of driving. Leak reduction and full seal conditioning typically require one complete oil-change interval for best results.

Is this safe for BS6-compliant vehicles?

Yes — Rislone One Seal does not contain chlorine, Teflon, or heavy metals that could harm catalytic converters or DPFs fitted to BS6 engines. It is compatible with the emission control systems on modern BS6 petrol and diesel vehicles.

Will it affect my PUC emission test?

Rislone One Seal helps reduce oil burning and blow-by in worn engines, which can actually improve exhaust emissions over time. It does not contain substances that would cause a correctly functioning engine to fail a PUC test.

Is Cash on Delivery available and what is the return policy?

Yes — naredi.in offers Cash on Delivery across India. If you are not satisfied, a 14-day return and exchange policy applies, and COD returns are accepted.

Complete Your Kit

Pair Rislone One Seal with these complementary treatments for complete engine and drivetrain care.

• Rislone Engine Treatment Conditioner and Cleaner (44102): A deep-cleaning engine flush and conditioner — ideal to use one oil change before Rislone One Seal to maximise sludge removal and prepare seals for conditioning.
• Rislone One Seal Stop Leak (44334): A targeted, higher-concentration one seal stop leak formula for vehicles with more severe or persistent external oil leaks — the next step when standard conditioning needs a boost.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available

The estimated lead time is 2 -3 days, but naredi.in or its affiliates are not responsible for delays or damages by courier. Any damages during transit need to be reported within 24 hours of receiving the shipment. We will try our best to help you resolve the issue.
See More

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return. 
See More