Rislone Cat Complete
Free Shipping Across India
Pickup available at naredi.in
Usually ready in 1 hour
Description
Description
Clean Your Catalytic Converter, O2 Sensors & Fuel System
The most advanced Rislone cleaner for catalytic converters and BS6 petrol emission systems — helping Indian cars pass PUC tests and run cleaner, longer.
- Dissolves and burns off carbon deposits from catalytic converter and exhaust passages for restored flow and efficiency.
- Cleans fuel injectors and combustion chambers to measurably reduce raw HC and CO emissions before PUC renewal.
- Helps borderline vehicles pass PUC emission tests — use 2–3 tanks before your scheduled test date for best results.
- Fully safe for BS6 three-way catalysts, O2 sensors, and E10/E20 ethanol-blend petrol used across India.
- Compatible with Maruti Suzuki, Hyundai, Tata Nexon, Tata Punch, Kia Seltos, and virtually every Indian petrol car.
Use When You Notice…
- High HC/CO at PUC or borderline emission readings: Carbon-choked converters release excess hydrocarbons — Cat Complete burns that soot away before your test date, giving your catalyst a genuine second chance.
- Check-engine light showing a P0420 catalyst efficiency code: This fault is often carbon-related, not physical damage — exactly the condition Cat Complete targets by restoring converter efficiency through normal driving.
- Sluggish throttle response and falling fuel economy (kmpl): A partially blocked catalytic converter creates exhaust back-pressure that robs power and worsens mileage, especially in heavy city stop-go traffic.
- Rotten-egg or sulphur smell from the exhaust: This odour often signals a catalyst struggling with unburnt fuel compounds — cleaning the system can noticeably reduce it.
- Increased fuel consumption with no obvious mechanical fault: Exhaust restriction from a carbon-laden cat forces the engine to work harder, quietly bleeding away your kmpl on every trip.
Key Benefits
- Catalytic Converter Regeneration: Advanced combustion modifiers burn off accumulated carbon soot to restore converter efficiency and exhaust flow.
- Lower HC and CO Emissions: Cleaner injectors and combustion chambers mean fewer raw hydrocarbons and carbon monoxide reaching the catalyst — and your PUC meter.
- PUC Test Confidence: Used across 2–3 tanks before your test date, Cat Complete gives borderline vehicles a realistic chance of passing without expensive repairs.
- O2 Sensor Protection: Keeps oxygen sensors free from carbon contamination so the engine management system reads accurately and runs efficiently.
- BS6 and Ethanol-Blend Safe: Fully compatible with BS6 three-way catalysts and India's mandatory E10/E20 petrol blends — no risk to modern emission hardware.
The Technology Inside
Rislone Cat Complete combines high-temperature combustion modifiers with professional-grade polyether amine (PEA) fuel-system detergents. The combustion modifiers lower the ignition threshold of stubborn carbon deposits inside the catalytic substrate, allowing them to oxidise and exit as harmless gas during normal driving — particularly effective during sustained highway runs above 80 km/h when the catalyst reaches full light-off temperature. Meanwhile, PEA detergents strip varnish and deposit build-up from injector tips, intake valves, and combustion chamber surfaces, reducing the volume of unburnt hydrocarbons that reach the converter in the first place. This two-stage approach addresses both the symptom (a dirty cat) and the root cause (a dirty fuel system feeding it), which is why Cat Complete consistently outperforms single-action catalytic converter cleaners on the market.
Dosage & Coverage
One 425 ml bottle of Rislone Cat Complete treats a standard petrol tank fill-up as directed on the label — simply add before fuelling. For routine maintenance, one treatment every 20,000–25,000 km is sufficient for most Indian city-driven cars. If you are preparing for a PUC renewal or trying to clear a P0420 code, run two to three consecutive tank treatments and include at least one highway run of 30+ km per tank to bring the catalyst to full regeneration temperature.
Compatibility
Safe to use with
- All petrol engines fitted with standard three-way catalytic converters and oxygen sensors
- BS6 emission systems (April 2020 onwards) across all Indian passenger cars
- E10 and E20 ethanol-blend petrol — the mandatory Indian pump fuels
- Turbocharged petrol engines (Tata Nexon turbo, Hyundai i20 turbo, Maruti Baleno)
- Maruti Suzuki, Hyundai, Tata, Honda, Kia Seltos, Tata Punch, MG, Volkswagen, Skoda, and BMW petrol vehicles
Not suitable for
- Does not repair physically damaged, melted, or structurally collapsed catalytic converters — a replacement will be required in those cases
- Not for diesel engines — use Rislone Hy-per Diesel Complete Fuel System Treatment for diesel vehicles
- Will not clear P0420 codes caused by an ageing or failed oxygen sensor rather than carbon build-up
Why It Matters in India
India's stop-go city traffic — whether you're crawling through Bengaluru's outer ring road or Mumbai's Western Express Highway at peak hour — prevents catalytic converters from ever reaching the sustained high temperatures needed to self-clean. Add inconsistent pump petrol quality, widespread adulteration in tier-2 and tier-3 cities, and mandatory E10 blends, and carbon accumulation in the catalyst is almost inevitable within 30,000–40,000 km of urban use. BS6 norms mean every petrol car sold since April 2020 — including the Tata Punch, Kia Seltos, and Tata Nexon — carries a sensitive three-way catalyst that must function correctly for the vehicle to pass its annual PUC certificate. Cat Complete is formulated specifically for these conditions, giving Indian drivers a cost-effective solution before reaching for a ₹8,000–₹25,000 replacement converter.
How To Use
- Shake the bottle and pour the entire 425 ml contents into the fuel tank before filling with petrol.
- Fill the tank fully with regular unleaded petrol and drive as normal.
- Include at least one continuous highway run of 30+ km to heat the catalyst to full regeneration temperature.
- Repeat for two to three consecutive tanks if preparing for a PUC test or clearing a fault code.
Safety Note: For external use on vehicles only. Store away from heat and direct sunlight. Keep out of reach of children.
Frequently Asked Questions
Can Cat Complete clear a check-engine light caused by a P0420 catalyst efficiency code?It can help significantly if the P0420 code has been triggered by carbon deposits reducing catalyst efficiency — which is the most common cause in Indian city-driven cars under 100,000 km. If the catalytic converter substrate is physically cracked, melted, or contaminated by oil burning, the code will persist and a replacement will be necessary.
Is this safe for my BS6 car's catalytic converter and O2 sensor?Yes, Cat Complete is fully confirmed safe for BS6 three-way catalytic converters and all oxygen sensors. It is also compatible with E10 and E20 ethanol-blend petrol, so there is no concern when using it in any petrol car sold in India after April 2020.
How often should I use Cat Complete for a city-driven car in India?Once every 20,000–25,000 km is the recommended maintenance interval for cars used primarily in city traffic. For heavy urban commuters — or any vehicle approaching its annual PUC renewal — a treatment once a year is a practical and cost-effective habit.
Will it work on my Kia Seltos, Tata Punch, or Tata Nexon?Absolutely — Cat Complete is compatible with all petrol variants of the Kia Seltos, Tata Punch, Tata Nexon, and virtually every other Indian petrol car. As long as the vehicle has a standard catalytic converter and runs on petrol, Cat Complete will work safely and effectively.
Can I order with Cash on Delivery and return if unsatisfied?Yes — naredi.in offers Cash on Delivery across India and a 14-day return and exchange policy, with COD returns accepted. For any queries before or after purchase, reach us on WhatsApp at +91 93112 11157 or at hello@naredi.in.
Complete Your Kit
For complete engine and fuel system health, pair Cat Complete with these Rislone products:
- Rislone Hy-per Fuel Complete Fuel System Cleaner Petrol (44700): A comprehensive top-end cleaner for injectors, intake valves, and combustion chambers — ideal to run before Cat Complete for a full system reset.
- Rislone Hy-per Diesel Complete Fuel System Treatment: If you also own a diesel vehicle in the household, this is the diesel equivalent — cleans injectors, DPF, and fuel lines for improved mileage and reduced smoke.
Warranty & Support in India
- Warranty: 1-year warranty against manufacturing defects
- Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
- Returns: 14-day return and exchange policy, COD returns accepted
- Delivery: Free delivery across India, Cash on Delivery available
Complete Your Kit
Everything you need for complete vehicle care
- Keep your battery healthy: CTEK Battery Chargers →
- Check battery health: Battery Testers →
- Full vehicle diagnostics: OBD Diagnostic Tools →
- Emergency backup: Jump Starters →
Further Reading
Our guides will help you get the most out of this product.
Shipping and Delivery
Shipping and Delivery
The estimated lead time is 2 -3 days, but naredi.in or its affiliates are not responsible for delays or damages by courier. Any damages during transit need to be reported within 24 hours of receiving the shipment. We will try our best to help you resolve the issue.
See More
Returns & Refunds
Returns & Refunds
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
See More