FREE SHIPPING ACROSS INDIA | GENUINE PRODUCTS | EXPERT AUTOMOTIVE SUPPORT

AUTHORIZED DEALER FOR: CTEK | AUTOOL | KONNWEI | FOXWELL | RISLONE — AUTHENTICITY GUARANTEED

17% off

Rislone 41812

✓ Authorized RISLONE Dealer for India
SKU: 41812
Sale price Rs. 1,400.00 Regular price Rs. 1,680.00 + GST Extra

Free Shipping Across India

Authorised
Since 2014
Free Shipping
Pan-India
14-Day Returns
No questions
Genuine Product
100% authorised
Not sure if this is right for your vehicle?
Ask Arjun · AI advisor · answers in seconds · free
Ask Arjun

Pickup available at naredi.in

Usually ready in 1 hour

The image displays a collection of payment logos, including visa and mastercard.

Description

Revive Your Hydraulic Jack with Rislone Jack Oil & Stop Leak

Hydraulic jack fluid with built-in seal conditioner — stops leaks and restores full lift performance in floor and bottle jacks.

  • Restores full lifting height and smooth, reliable operation in floor and bottle jacks.
  • Integrated seal conditioner rejuvenates worn ram seals and stops hydraulic jack oil leaks at the source.
  • Correct viscosity formulated specifically for jack cylinders — not a generic substitute that risks seal damage.
  • Costs a fraction of a new jack — the smartest affordable fix for neglected workshop jacks.
  • Trusted by tyre shops and roadside mechanics across India for quick, safe jack revival.

Use When You Notice…

  • Jack slowly drops under load: Internal seal bypass lets fluid escape under pressure — the seal conditioner swells and rejuvenates seals so the jack safely holds the load.
  • Jack cannot reach full extension height: Low or contaminated jack oil reduces lift travel; topping up with Rislone 41812 restores the full range of motion.
  • Visible oil seepage around the ram or fill plug: A classic sign of deteriorated seals — the stop-leak chemistry targets this exact failure point and seals it.
  • Pump feels spongy or needs extra strokes: Air trapped with low fluid causes this; refilling and bleeding with Rislone jack oil resolves both issues together.
  • Jack unused for a long season: Stored jacks develop dried, shrunken seals — the conditioner rehydrates them without disassembly.

Key Benefits

  • Full Lift Restored: Renews the complete range of ram travel so your jack reaches maximum height every time.
  • Leak Stopped at the Source: Seal conditioners target worn O-rings and ram seals — the most common failure point in ageing workshop jacks.
  • Correct Viscosity: Formulated specifically for hydraulic jack cylinders, not a generic mineral oil that can cause seal swell or premature wear.
  • Safety First: A slow-dropping jack is a serious hazard — restoring seal integrity means the load stays safely held during tyre changes and underbody work.
  • Economical Fix: Reviving an old jack with jack oil with stop leak costs far less than buying a replacement, making it the go-to solution for Indian workshops.

The Technology Inside

Rislone 41812 is a mineral-oil hydraulic fluid blended to the precise ISO viscosity grade demanded by floor and bottle jack cylinders. The seal conditioning package contains proprietary elastomer rejuvenators that restore flexibility and swell to dried or hardened nitrile and polyurethane ram seals — the same seals that deteriorate fastest in India's extreme summer heat. Unlike brake fluid or power steering fluid used as a shortcut, this formulation will not over-swell seals or strip internal coatings. The result is restored hydraulic pressure retention, meaning the ram holds its position under load without creep. One bottle addresses both low-fluid and seal-wear causes of jack failure simultaneously.

Dosage & Coverage

Lower the jack fully, locate the fill plug (rubber plug or screw on the reservoir), and top off or completely refill with Rislone Jack Oil & Stop Leak to the level marked inside the reservoir. After filling, bleed trapped air by pumping and releasing the jack several times before returning it to service. For most standard floor and bottle jacks, one bottle is sufficient for a complete refill or top-up treatment.

Compatibility

Safe to use with

  • Hydraulic floor jacks (all common workshop sizes)
  • Bottle jacks using mineral hydraulic jack oil
  • Scissor jacks with hydraulic reservoir systems
  • Most branded and unbranded Indian workshop jacks

Not suitable for

  • Systems requiring brake fluid (DOT 3/4/5)
  • Power steering or automatic transmission fluid systems
  • Jacks specified for synthetic or phosphate-ester hydraulic fluid
  • Jacks with fully broken pump mechanisms requiring mechanical repair

Why It Matters in India

Indian workshop and roadside jacks work harder than almost anywhere else — lifting vehicles over pits, on uneven surfaces, through monsoon season and into 45°C summer heat. High ambient temperatures accelerate seal drying and fluid breakdown, turning a reliable jack into a slow-dropping hazard faster than in cooler climates. For every tyre shop handling Tata Punch, Kia Seltos, Tata Nexon or BMW M5 wheel changes daily, a safe, functional jack is non-negotiable. Rislone 41812 is the affordable, proven solution that keeps Indian workshop jacks safe and operational without buying new equipment.

How To Use

  1. Lower the jack fully to release all hydraulic pressure before opening any plug.
  2. Remove the fill plug and drain old or contaminated fluid if heavily discoloured.
  3. Pour Rislone Jack Oil & Stop Leak in until fluid reaches the correct reservoir level.
  4. Replace the plug, then pump and release the jack five to six times to bleed trapped air.

Safety Note: Never work under a vehicle supported only by a hydraulic jack. Always use axle stands once the vehicle is raised. Test the jack with a load before resuming workshop use.

Frequently Asked Questions

Can this fix a jack that completely fails to lift anything?

If the jack still builds some pressure but drops slowly or cannot reach full height, Rislone 41812 will typically restore normal operation. If the pump mechanism is mechanically broken or the jack builds zero pressure at all, internal mechanical repair or replacement is needed before the fluid can help.

How long does the stop-leak effect last?

Under regular workshop use, one treatment restores the jack for several months to years, depending on usage frequency and original seal condition. Jacks used daily in busy tyre shops may benefit from an annual top-up as part of routine maintenance.

Is this safe for jacks used on BS6 vehicles like the Tata Punch or Kia Seltos?

Yes — this is a jack hydraulic fluid, not an engine or fuel additive, so BS6 compliance of your vehicle is completely unaffected. It is safe to use when servicing any modern Indian vehicle including Tata Nexon, Kia Seltos and others.

Can I order with Cash on Delivery and get it delivered to a Tier 2 city?

Yes, naredi.in offers free delivery across India with Cash on Delivery available. Most Tier 2 and Tier 3 city orders are delivered within 4–7 business days.

Can I mix this with existing fluid already in the jack?

Yes, Rislone 41812 is compatible with standard mineral hydraulic jack oil and can be topped up directly into the existing fluid. If the old fluid is heavily contaminated or discoloured, draining first and doing a complete refill will give the best results.

Complete Your Kit

Pair Rislone 41812 with these companion products for a fully maintained workshop.

  • Rislone Heavy Duty Hydraulic Seal (41820): Purpose-built for larger hydraulic systems with more severe seal wear — ideal when 41812 alone is not enough for heavily degraded industrial equipment.

Warranty & Support in India

  • Warranty: 1-year warranty against manufacturing defects
  • Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
  • Returns: 14-day return and exchange policy, COD returns accepted
  • Delivery: Free delivery across India, Cash on Delivery available

Complete Your Kit

Everything you need for complete vehicle care

Shipping and Delivery

The estimated lead time is 2 -3 days, but naredi.in or its affiliates are not responsible for delays or damages by courier. Any damages during transit need to be reported within 24 hours of receiving the shipment. We will try our best to help you resolve the issue.
See More

Returns & Refunds

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return. 
See More

Documents

Customer Reviews