Rislone High Mileage / Kilometre Engine Repair
Rislone High Mileage Engine Repair is a superior engine oil additive that can save you money on costly repairs or vehicle replacement. It has a blend of the best performance additives to mend the most common oil-related problems. This advanced formula works with all engine oils to restore lost compression, reduce noise, and lower oil consumption. It also increases power and improves the performance of worn cylinders, rings, bearings, and seals. Adding a bottle of Engine Repair when you change your oil and filter will extend the life of your vehicle’s engine. You can also top off your oil with Engine Repair when the oil level is low. Engine Repair works with all types of engine oils, including petroleum, semi-synthetic, synthetic, and high-mileage or high-kilometre formulas.
Dual Action Formula—Twice the performance
Safe And Easy To Use
Works To Seal & Stop Leaks Plus…
Rislone High Mileage Engine Repair Restores Performance—Increases compression and horsepower.
- Hi-Tech Additives
- Friction Modifiers
- Stop Leak Treatment
Rislone High Mileage Engine Repair Adds Protection—Stops leaks, noise and smoking.
- Oil Stabilizer
- Viscosity Improvers
- Seal Conditioners
The result is improved compression, horsepower and increased performance.
The common element between all of the engine components is the oil. Oil is the lifeblood of the engine and is pumped under pressure to all the moving parts. The two main parts needing oil for lubrication are the bearings and pistons. As the engine ages and gains more kilometres, the oil alone can’t do the job. Internally, parts don’t fit as tightly as they originally did, which causes noise and loss of power. Bearings wear down, seals leak, lifters tick, blow-by passes around tired rings, and power is lost. When installed, Engine Repair helps to stop and prevent these problems and will also extend the useful life of your engine. Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection and be a method of removing contaminants. As lubricants degrade, their properties change, leading to increased friction and wear. Over time the natural wear that occurs inside the engine causes reduced oil pressure, loss of compression (power loss), lower fuel efficiency, oil consumption (leaks & smoking) and noise (knocking & ticking). When installed, Rislone High Mileage Engine Repair helps to stop and prevent these problems
and enhances the useful life of your Engine. The result is improved compression, horsepower and increased performance.
INSTRUCTIONS to use Rislone High Mileage Engine Repair:
Adding to existing Engine Oil
Remove the engine dipstick and check the oil level. If oil is low, remove the oil cap and install the entire contents of the two-chamber bottle into the engine crankcase. Do not overfill. Top off with the manufacturer’s recommended engine oil as needed. Reinstall the dipstick and oil cap. Drive/ idle engine for 10-15 minutes. Depending on the engine problem, results will either be immediate or noticeable within two days or 150 km of driving. In engines with seriously damaged components, a second treatment may be required. In this case, it is suggested that the oil and filter be changed, and a second application of Engine Repair be added.
Changing Oil
If using Engine Repair when changing oil, add the entire contents of the bottle after the filter is changed. Then refill with the manufacturer’s recommended oil to the proper level. Drive the vehicle and recheck the oil level.
DOSAGE for Rislone High Mileage Engine Repair:
One bottle is designed to treat 4 to 6 litres of oil, which is the normal size for most
vehicles. On smaller systems from 2 to 3.9 litres, only use half bottle, pouring equal
amounts from each side. For larger systems use one bottle for every 5 litres of capacity.
WHAT IS YOUR ENGINE PROBLEM?
Small Leaks—Need to add oil 1X per month
Medium Leaks—Need to add oil 1X per week
Leaks—Seals and Gaskets
Noise—Knocking or Ticking
Smoking– Blue Exhaust Smoke
Low Compression—Reduced Power
Worn Engine Parts
High Mileage / High Kilometre
WE CAN HELP!!!
Safe For— Domestic / Import, Cars, Utes, Trucks, Vans and SUV’s
Oil—Regular Petroleum, High Mileage, Synthetic Blends and Full Synthetic Oils
Use On– Gasoline, Diesel and Turbocharged Engines
Works On—3, 4, 5, 6, 8 and 10 Cylinder Engines
Works on ALL Engines
Gas, Diesel, Hybrid and Turbo