Rislone Hy-per Fuel Complete Petrol System Treatment

Use When You Notice…

• Poor mileage versus when the vehicle was newer: Carbon on injectors restricts fuel atomisation — this petrol system cleaner dissolves deposits to recover lost kmpl.
• Rough idle or hesitation at low speed: Varnish from ethanol-blend petrol disrupts fuel delivery; the formula restores smooth, consistent flow.
• Engine knock or pinging under load: Cleaning combustion chamber hot spots reduces knock caused by lower-RON Indian pump petrol.
• Sluggish throttle response in city traffic: Dirty injectors slow pickup — this fuel system cleaner restores the sharp response your engine was built to deliver.
• Upcoming PUC emission test: A cleaner fuel system burns more completely, helping lower HC and CO readings at the check post.

Key Benefits

• Restored Fuel Economy: Dissolves injector deposits to improve kmpl measurably across city and highway driving cycles.
• Ethanol-Blend Protection: Stabilises E10 and E20 petrol to prevent varnish, corrosion and phase separation in fuel system components.
• Knock Elimination: Cleans combustion chamber deposits that cause pre-ignition, protecting turbocharged engines from expensive damage.
• BS6 System Safe: Formulated without compounds harmful to catalytic converters or oxygen sensors — safe for every BS6 vehicle sold in India.
• Emission Test Ready: Cleaner combustion reduces unburnt hydrocarbons, helping your vehicle pass PUC checks more comfortably.

The Technology Inside

Rislone Hy-per Fuel uses advanced PEA (polyether amine) and PIBA (polyisobutylene amine) detergent chemistry — the same dual-action cleaning platform trusted by OEM fuel programmes worldwide. PEA penetrates and lifts stubborn carbon deposits from GDI intake valves and combustion chambers, while PIBA keeps injector tips atomising fuel at the correct spray pattern. Together they address the accelerated deposit formation that Indian pump petrol — with its variable RON rating between 87 and 91 and mandatory ethanol blending — causes in modern MPFI and direct-injection engines. The formula also includes a corrosion inhibitor package that protects aluminium and rubber fuel system components from the moisture-attracting effect of ethanol in E10 and E20 blends.

Dosage & Coverage

One bottle of Rislone Hy-per Fuel treats a standard passenger car or bike fuel tank. Add the full bottle to a nearly empty tank before filling with petrol so the treatment mixes thoroughly with fresh fuel. For best results, use every 10,000–15,000 km as a preventive petrol injector cleaner, or before your annual PUC test for a cleaner emission reading.

Compatibility

Safe to use with

• All modern petrol engines: MPFI, GDI, and turbocharged variants (including BS6 engines).
• E10 and E20 ethanol-blend petrol now in use across Indian states.
• BS6 catalytic converters and oxygen sensors — no sensor poisoning compounds.
• Cars, SUVs, and two-wheelers from Maruti Suzuki, Hyundai, Tata, Honda, Bajaj, Hero and TVS.

Not suitable for

• Diesel engines — use Rislone Hy-per Diesel for diesel fuel system cleaning.
• Not a substitute for a clogged fuel filter or worn spark plugs — replace these on schedule.
• Not recommended for two-stroke petrol engines.

Why It Matters in India

Indian petrol quality varies significantly across states and even across pumps within the same city — adulteration and inconsistent RON ratings are real concerns that accelerate deposit build-up faster than in regulated markets. The mandatory rollout of E20 petrol adds moisture-related corrosion risk to older fuel systems not originally designed for high ethanol content. In the extreme summer heat of Indian roads — where under-bonnet temperatures regularly exceed 50°C — varnish and gum formation happens at a far higher rate than the engine maps programmed by Maruti, Hyundai or Tata anticipated. Regular use of a quality fuel pump cleaner and system treatment is genuinely more important here than in countries with tightly standardised pump fuel.

How To Use

1. Shake the bottle and pour the full contents into a nearly empty petrol tank.
2. Fill the tank with regular pump petrol and drive normally through the full tank.
3. Repeat every 10,000–15,000 km or before each PUC emission test for ongoing protection.

Safety Note: For external use on vehicles only. Keep out of reach of children. Store in a cool, dry place away from direct sunlight.

Frequently Asked Questions

Is it safe for my BS6 car or bike?

Yes — Rislone Hy-per Fuel is formulated to be fully safe for the catalytic converters and O2 sensors required under BS6 emission norms. It contains no sulphur, phosphorus or metallic compounds that could damage after-treatment systems in any BS6 vehicle sold in India.

Will it work with E10 or E20 petrol available at Indian pumps?

Absolutely. The formula is specifically designed to stabilise ethanol-blend petrol and counteract the varnish and corrosion that E10 and E20 cause in fuel system components. It is one of the best petrol additive choices for the current Indian fuel environment.

How often should I use it?

Every 10,000–15,000 km for most vehicles. If you drive primarily in city traffic — short trips, frequent stops, lower speeds — consider using it every 7,000–8,000 km, as stop-go conditions accelerate deposit formation significantly.

Can it help me pass my PUC test?

A clean fuel system burns petrol more completely, which measurably reduces unburnt hydrocarbon (HC) and carbon monoxide (CO) emissions — the two readings checked during a PUC test. Using a tank of treated petrol before your test is a practical, low-cost step many Indian drivers take regularly.

Is Cash on Delivery available and how long does delivery take?

Yes, COD is available on all orders at naredi.in, with free delivery across India. Most orders reach metro cities within 2–4 business days; delivery to other locations may take 4–7 business days depending on your pin code.

Complete Your Kit

Pair Rislone Hy-per Fuel with these complementary products for a complete engine protection plan.

• Rislone Hy-per Fuel Complete Fuel System Cleaner Petrol (44700): A deeper-clean formula ideal for engines showing more severe deposit symptoms or returning from a long storage period.
• Rislone Octane Booster (44747): Raises the effective RON rating of Indian pump petrol, directly combating knock in turbocharged engines like the Nexon, Baleno and i20 — the ideal link product to use alongside this treatment.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available