Rislone Hy-per Fuel Complete Petrol System Treatment

Use When You Notice…

• Declining kmpl or poor fuel economy: Carbon deposits narrow injector spray patterns — this petrol system cleaner restores fine atomisation so you recover measurable mileage every tank.
• Rough idle or engine hesitation: Gummed injectors misfire under load — PEA detergent chemistry dissolves varnish so combustion stays smooth even on inconsistent Indian pump petrol.
• Sluggish throttle or loss of pickup: Deposit-coated intake valves rob turbocharged engines of boost response; a clean fuel system restores the performance you feel immediately.
• Engine knock or pinging on regular petrol: Low-RON Indian pump petrol causes pre-ignition — this petrol additive raises effective octane to protect your engine.
• Before your PUC emission test: A clean combustion chamber burns fuel more completely, reducing HC and CO emissions so you pass with confidence.

Key Benefits

• Restores Fuel Economy: Cleans injectors and combustion chambers to recover kmpl lost to carbon build-up — measurable improvement within one full tank cycle.
• Raises Effective Octane: Boosts the RON rating of regular Indian pump petrol, silencing knock and protecting turbocharged engines like those in the Baleno, i20, and Nexon.
• Ethanol-Blend Compatible: Stabilises E10 and E20 petrol, counteracting the accelerated deposit formation that comes with mandatory ethanol blending in India.
• BS6 System Safe: Verified safe for catalytic converters and O2 sensors — no risk to BS6 emission systems in cars or two-wheelers.
• Works on Cars and Bikes: Compatible with Maruti Suzuki, Hyundai, Tata, Honda, Bajaj, Hero, and TVS petrol vehicles — one product for your entire garage.

The Technology Inside

Rislone Hy-per Fuel uses a concentrated PEA (polyether amine) and PIBA (polyisobutylene amine) detergent system — the same chemistry specified by engine manufacturers for top-tier fuel certification. PEA penetrates hardened carbon deposits in GDI direct-injection engines and MPFI port-injected engines alike, dissolving varnish that ordinary petrol cannot shift. PIBA keeps intake valves clean and prevents new deposit formation even when running E10 or E20 ethanol-blend petrol. Together they also contain corrosion inhibitors that protect fuel lines, seals, and metal components from the moisture-absorbing effects of ethanol — a real concern given India's humid climate. The result is a cleaner, more consistent fuel spray pattern and more complete combustion every stroke.

Dosage & Coverage

Add one full bottle to your fuel tank before filling with fresh petrol — the turbulence of filling mixes the product thoroughly. One bottle treats tanks up to approximately 65 litres, covering the full range from small two-wheeler tanks to large SUV tanks when dosed per the label chart. Use every 10,000–15,000 km for preventive maintenance, or immediately when symptoms of poor fuel economy or rough idle appear.

Compatibility

Safe to use with

• All petrol engines: MPFI, GDI (direct injection), naturally aspirated, and turbocharged variants
• E10 and E20 ethanol-blend petrol — currently the standard across Indian pumps
• BS6 catalytic converters and oxygen sensors — no damage to emission control systems
• Petrol cars, SUVs, and two-wheelers including Maruti Suzuki, Hyundai, Tata, Honda, Bajaj, Hero, and TVS

Not suitable for

• Diesel engines — for diesel, use Rislone Hy-per Diesel fuel treatment instead
• Not a substitute for a blocked fuel filter, worn spark plugs, or faulty fuel pump — address mechanical faults first
• Not for use in two-stroke pre-mix fuel systems

Why It Matters in India

Indian pump petrol ranges from 87 to 91 RON depending on the station and state — well below what most modern turbocharged engines are calibrated for. Mandatory E10 blending since April 2023, with E20 rolling out progressively, accelerates injector and valve deposits faster than in countries with tightly regulated, consistent fuel. Add India's extreme summer heat and stop-start city traffic, and deposit formation is significantly faster than European or American driving conditions — making a quality petrol system cleaner a genuine maintenance essential rather than an optional extra.

How To Use

1. Shake the bottle and pour the full contents into a nearly empty petrol tank.
2. Fill the tank with petrol immediately after adding — this mixes the product evenly through the fuel.
3. Drive normally for the full tank cycle; no warm-up procedure or idle time required.
4. Repeat every 10,000–15,000 km, or before each annual PUC emission test renewal.

Safety note: For external use on vehicle fuel systems only. Store in a cool, dry place away from direct sunlight and out of reach of children.

Frequently Asked Questions

Is Rislone Hy-per Fuel safe for my BS6 car or bike?

Yes — the formula is fully compatible with BS6 catalytic converters and O2 sensors. Rislone has engineered all its fuel system products to meet modern emission-system requirements, so there is no risk of sensor damage or catalyst poisoning.

Will it work with the E10 and E20 petrol sold at Indian pumps?

Absolutely. The liquid formula is specifically ethanol-blend safe and includes stabilisers that counteract the deposit-forming and moisture-absorbing tendencies of ethanol-blended petrol. It is suitable for all current Indian pump petrol grades.

How often should I use it?

Every 10,000–15,000 km for routine preventive maintenance, or before each PUC test. Vehicles driven primarily in city traffic experience faster deposit build-up and benefit from use closer to the 10,000 km interval.

Can I use it in my two-wheeler as well as my car?

Yes — it is compatible with all four-stroke petrol two-wheelers including Hero, Bajaj, Honda, and TVS models. Simply adjust the quantity to match your tank size as per the label dosage chart.

Is Cash on Delivery available, and how quickly will it arrive?

Yes, COD is available on all orders from naredi.in with free delivery across India. Most orders are dispatched within one business day and reach metro cities within 2–4 days.

Complete Your Kit

Pair Rislone Hy-per Fuel with these targeted Rislone products for a complete petrol system overhaul.

• Rislone Hy-per Fuel Complete Fuel System Cleaner Petrol (44700): A deeper-action fuel system cleaner designed for high-mileage engines — ideal to use before Hy-per Fuel as a one-time intensive clean.
• Rislone Octane Booster (44747): When maximum knock protection is the priority — especially for turbocharged engines running on regular Indian pump petrol — this dedicated octane booster delivers a stronger RON uplift alongside your regular petrol additive routine.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available