Rislone 44110

Use When You Notice…

• Blue or grey smoke on start-up or acceleration: Oil is slipping past worn rings or valve guides — this product thickens the oil film and seals those pathways to cut visible smoke.
• Oil level dropping between services: Worn ring seals burn oil internally; ring conditioners inside this formula address that directly and affordably.
• Engine feels sluggish and lacks earlier power: Compression loss from ring wear is a key cause — this product helps recover measurable performance without a strip-down.
• CNG or LPG vehicle burning more oil: Alternate-fuel conversions accelerate ring and valve wear; this product conditions both pathways effectively.
• Failing PUC emission test due to visible smoke: Reducing oil burning lowers hydrocarbon emissions and can help your vehicle pass the PUC check.

Key Benefits

• Cuts Blue Smoke: Viscosity improvers thicken the oil film at the ring belt and valve guides, visibly reducing exhaust smoke within one interval.
• Restores Lost Compression: Improved ring-to-wall sealing recovers cylinder pressure, bringing back the responsiveness high-mileage engines lose over time.
• Reduces Oil Consumption: Seal conditioners swell and rejuvenate hardened O-rings and valve stem seals — fewer top-ups between changes.
• Protects in Indian Summer Heat: Advanced anti-wear agents maintain a stable oil film even at 42–48°C ambient temperatures common in Indian summers.
• Delays Costly Overhaul: A practical, affordable step that extends the useful life of high-mileage Maruti, Hyundai, Tata and Honda engines before committing to a full repair.

The Technology Inside

Rislone 44110 combines viscosity index improvers, advanced anti-wear agents and proprietary seal conditioners into a single concentrate. The viscosity improvers are polymer-based and shear-stable — they selectively thicken the oil film in the high-temperature ring belt zone, improving ring seal against the cylinder wall without over-thickening the bulk oil. The seal conditioners chemically condition nitrile and polyacrylate elastomers — the same materials used in valve stem seals and crankshaft lip seals common in Indian engines — restoring their original pliability so oil stops bypassing them. Anti-wear agents then form a sacrificial boundary-lubrication layer on worn cam lobes and tappets, reducing the metal-to-metal contact that worsens ring and valve wear in dusty, high-heat Indian operating environments.

Dosage & Coverage

One 500 ml bottle treats a standard 3–5 litre engine oil system. Add directly to the engine oil; if the sump is already at the full mark, drain an equivalent volume first so the total fill stays within the dipstick range. Use at every oil change as a regular supplement — the full benefit develops over one complete oil-change interval of normal driving.

Compatibility

Safe to use with

• High-mileage petrol and diesel engines not under a strict manufacturer no-additive warranty clause.
• CNG and LPG bi-fuel converted engines — rickshaws, cabs and commercial vehicles included.
• All major Indian engine oil grades: 5W-30, 10W-30, 15W-40 and 20W-50.
• Engines already using synthetic, semi-synthetic or mineral engine oil.

Not suitable for

• Brand-new engines under a tight manufacturer warranty — check your owner's manual first.
• Engines with a broken piston, cracked ring land or scored cylinder bore — mechanical damage requires workshop repair.
• Two-stroke engines or motorcycle wet-clutch systems.

Why It Matters in India

Indian cities run an enormous fleet of ageing cars, shared cabs and CNG autorickshaws whose engines regularly exceed 1,50,000 km. Potholes, speed breakers every 500 metres and relentless stop-start traffic in Delhi, Mumbai and Bengaluru accelerate ring and seal wear far faster than in temperate climates. Rislone High Mileage Engine Repair is trusted by Indian mechanics and workshops as a sensible, affordable step — rejuvenating aging engines without costly workshop repairs before an overhaul becomes unavoidable. It also addresses the seals worn oil gaskets and O-rings common in high-mileage Indian vehicles that cause the frustrating slow oil loss many owners experience.

How To Use

1. If the engine oil is at the full mark, drain enough oil to accommodate 500 ml before adding.
2. Pour the entire bottle of Rislone 44110 directly into the engine oil filler neck.
3. Replace the oil filler cap securely and start the engine for two minutes to circulate.
4. Drive normally and monitor oil consumption and smoke over the full interval.

Safety Note: Always add to a warm (not hot) engine. Do not exceed the maximum oil level on the dipstick. Keep out of reach of children.

Frequently Asked Questions

Can I use this product with every oil change going forward?

Yes — Rislone 44110 is designed for ongoing use, not just a one-time treatment. Adding it at every oil change maintains the ring conditioning and seal protection continuously, which is especially useful for high-mileage Indian vehicles that cover long distances annually.

Is it safe for BS6-compliant petrol and diesel engines?

Yes, when used at the recommended dose it does not introduce sulphated ash, phosphorus or sulphur levels that would harm a BS6 catalyst or DPF beyond what a normally worn engine already produces. Always follow the dosage instructions on the label.

Will it help my vehicle pass the PUC emission test?

Reducing oil burning directly lowers unburnt hydrocarbon emissions visible as blue smoke — the same hydrocarbons measured in a PUC check. Many Indian owners report noticeable smoke reduction within a few hundred kilometres of use. Results vary depending on the degree of wear.

Is it suitable for my Maruti Swift, Hyundai i20 or Tata Nexon?

Yes — Rislone 44110 is suitable for high-mileage Maruti, Hyundai, Tata and Honda engines running on petrol, diesel, CNG or LPG. It is compatible with all engine oils approved for these vehicles. If your vehicle is still under the manufacturer's powertrain warranty, verify the additive policy first.

Is Cash on Delivery available and how long does delivery take?

Yes, COD is available across India through naredi.in. Orders typically arrive within 3–7 business days depending on your location, with free delivery on all orders. Track your order via the link sent to your registered mobile number after dispatch.

Complete Your Kit

Pair Rislone 44110 with these complementary products for complete engine protection and leak control.

• Rislone One Seal Stop Leak (44334): Targets external oil leaks from gaskets and seals — the ideal companion when you also notice oil patches under your vehicle alongside blue smoke.
• Rislone Engine Oil Stop Leak Concentrate: A concentrated seal rejuvenator best used when oil seepage from the sump gasket or rear main seal is the primary concern alongside ring wear.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available