Rislone 44700

Use When You Notice…

• Mileage has dropped over recent months: Carbon deposits reduce combustion efficiency; this cleaner dissolves them to recover lost kmpl.
• Sluggish pickup at signals or while overtaking: Dirty injectors deliver uneven fuel spray — cleaning restores sharp, consistent throttle response.
• Rough idle or low-rpm misfire: Partially blocked injectors cause uneven fuelling; a full system clean smooths idle immediately.
• Engine hesitation on quick acceleration: Varnish in intake ports disrupts airflow and fuel atomisation — this product clears it in one tank.
• You have never used a fuel system cleaner: Years of short city trips create heavy deposit build-up that only a high-detergency liquid cleaner can remove.
• Upcoming PUC test or long highway trip: A clean fuel system burns fuel more completely, lowering HC and CO emissions before inspection.

Key Benefits

• Full System Clean: Clears injectors, intake valves, and combustion chambers tank-to-tailpipe in one 500 ml dose.
• Mileage Recovery: Restores fuel economy by dissolving the deposits that rob kmpl on Indian roads and highways.
• Sharper Throttle: Removes carbon build-up for quicker pickup — critical for turbocharged engines in the Maruti Baleno, Hyundai i20, and Tata Nexon.
• Ethanol-Blend Safe: Formulated to handle E10 and E20 petrol, counteracting varnish caused by India's mandatory ethanol blending programme.
• Deposit Prevention: Inhibits varnish re-formation between services, keeping your fuel system cleaner for longer after each treatment.
• Emission Support: Promotes complete combustion, supporting BS6 emission compliance and helping borderline vehicles pass PUC tests.

The Technology Inside

Rislone 44700 uses a high-detergency PEA (polyetheramine) and PIBA (polyisobutylene amine) chemistry — the same detergent classes specified in Top Tier fuel standards. These molecules bind to carbon and varnish deposits inside injector nozzles, intake ports, and combustion chamber surfaces, breaking them into fragments small enough to burn safely with the fuel charge. Unlike surface-level cleaners, PEA penetrates baked-on carbon that has accumulated over thousands of kilometres of stop-go Indian city driving. The formula also contains corrosion inhibitors that protect fuel system metals against the moisture absorption tendency of E10 and E20 ethanol blends. Nothing is left behind to coat sensors, foul spark plugs, or compromise your BS6 catalytic converter.

Dosage & Coverage

One 500 ml bottle treats one full tank of petrol in a typical Indian passenger car or SUV — covering engines from 800 cc hatchbacks to 1,500 cc turbocharged crossovers. Pour the entire bottle before filling with fresh petrol so the cleaner mixes thoroughly from the first kilometre. For preventive maintenance, use every 10,000–15,000 km; if your car shows clear symptoms of deposit build-up, a second treatment after the next full tank cycle accelerates recovery.

Compatibility

Safe to use with

• All petrol engine types: MPFI, GDI (direct injection), port-injected, and carburetted
• Turbocharged and naturally aspirated engines — Maruti Suzuki, Hyundai, Tata, Honda, Renault, Kia, and more
• BS6-compliant vehicles with catalytic converters and oxygen sensors
• E10 and E20 ethanol-blend petrol, standard across India since 2023
• Two-wheelers: Bajaj, Hero, TVS, Honda, and Royal Enfield petrol engines

Not suitable for

• Diesel engines — this is a petrol fuel system cleaner only; do not add to diesel tanks
• Physically damaged or mechanically seized injectors — cleaning restores dirty injectors but cannot replace failed components
• Vehicles with known fuel system leaks — repair leaks before adding any additive

Why It Matters in India

Indian pump petrol varies widely in quality across states and even across petrol stations — adulteration and inconsistent refinery standards mean your injectors face contaminants that most global formulations are not tested against. Add India's brutal summer heat (engine bay temperatures above 60 °C are common), mandatory E10 and E20 ethanol blending, and hours of daily stop-go traffic, and the conditions for carbon and varnish build-up are far more severe than in the cooler, cleaner-fuel markets where most car manufacturers set their service intervals. A complete fuel system clean every 10,000–15,000 km is not optional in India — it is preventive maintenance as essential as an oil change.

How To Use

1. Ensure your petrol tank is at least one-quarter full before beginning.
2. Pour the entire 500 ml bottle directly into the fuel tank opening.
3. Fill the tank with fresh petrol immediately after adding the cleaner.
4. Drive normally through a full tank cycle — the clean is complete by the time you refuel.

Safety Note: For petrol engines only. Keep out of reach of children. Store away from heat and open flame. Do not mix with diesel or two-stroke oil.

Frequently Asked Questions

How often should I use a complete fuel system cleaner in India?

Every 10,000–15,000 km, or at least once a year if your annual mileage is lower. City-driven cars benefit most from more frequent cleaning because short, slow trips create heavier deposit formation than highway driving.

Will this fix failed injectors or only clean dirty ones?

It cleans dirty and partially blocked injectors very effectively — most rough-idle and hesitation complaints caused by deposits resolve within one tank. If an injector has a physically damaged needle or seized solenoid, mechanical replacement is required and no liquid cleaner can substitute for that.

Is it safe to use before a PUC emission test?

Yes — a clean fuel system burns petrol more completely, which typically reduces hydrocarbon (HC) and carbon monoxide (CO) readings at the tailpipe. Using Rislone 44700 one full tank before your PUC test date is a practical, low-cost way to improve your chances of passing, especially on older BS4 vehicles.

Is it compatible with my BS6 Maruti, Hyundai, or Tata car?

Fully compatible. The formula is safe for BS6 catalytic converters, lambda (O2) sensors, and all modern fuel system materials including high-pressure GDI fuel rails. It has been used across millions of vehicles globally without sensor damage.

Does naredi.in offer Cash on Delivery and pan-India delivery?

Yes — naredi.in ships Rislone 44700 across India with free delivery and Cash on Delivery available at checkout. Orders are typically dispatched within 1–2 business days, and a 14-day return policy applies if you are not satisfied.

Complete Your Kit

Pair Rislone 44700 with these complementary products for a complete fuel system solution:

• Rislone Hy-per Fuel Injector Cleaner Concentrate (44701): A concentrated injector-specific formula for more severe blockages — ideal as a follow-up treatment or for high-mileage engines with stubborn deposit build-up.
• Rislone Hy-per Fuel Octane Booster (44747): Raises the RON rating of regular Indian pump petrol, eliminating engine knock and further improving combustion efficiency — especially valuable for turbocharged engines running on 87–91 RON fuel.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available