Rislone 44701

Use When You Notice…

• Rough or jerky idle at low RPM: Partially clogged injectors disrupt the fuel spray pattern — this liquid injector cleaner dissolves those deposits and smooths things out.
• Gradual drop in mileage (kmpl): Fouled injectors over-fuel or under-fuel cylinders; cleaning them restores efficient combustion and recovers lost fuel economy.
• Sluggish throttle response or poor pickup: Deposit-coated injectors cannot atomise fuel correctly — clearing them improves acceleration noticeably.
• Engine feels flat after filling at an unfamiliar pump: Inconsistent Indian petrol quality accelerates deposit formation; a preventive additive treatment counteracts the damage quickly.
• Upcoming PUC emission check: Cleaner injectors burn fuel more completely, reducing exhaust smoke and helping you pass Pollution Under Control tests with confidence.

Key Benefits

• Injector Deep-Clean: The concentrated detergent chemistry reaches injector tips and dissolves varnish, carbon, and gum deposits that diluted local additives often miss.
• Mileage Recovery: Restoring the correct fuel spray pattern directly improves combustion efficiency — most riders and drivers notice a measurable kmpl gain within one tank.
• Smoother Acceleration: Eliminates the jerky, hesitant throttle response that is especially noticeable in stop-and-go Indian city traffic.
• Ethanol-Blend Safe: Fully verified for E10 and E20 petrol — protects fuel system seals and injectors against the corrosive effects of higher ethanol content.
• BS6 System Safe: Formula is confirmed safe for catalytic converters and O2 sensors found in all BS6-compliant vehicles sold in India after April 2020.
• No Workshop Needed: A simple pour-in additive treatment — no tools, no mechanic visit, no downtime. Add to tank and drive or ride as normal.

The Technology Inside

Rislone 44701 uses a high-concentration polyetheramine (PEA) and detergent-dispersant blend specifically formulated for smaller fuel tanks common in Indian bikes, scooters, and hatchbacks. PEA is widely regarded by engine chemists as the most effective chemistry for removing baked-on injector deposits because it attacks carbon and varnish at a molecular level rather than simply loosening surface grime. The concentrated ratio means even a 177 ml dose delivers a therapeutic level of active chemistry relative to a 10–15 litre tank fill. Beyond the injector tips, the formula travels through the entire induction system — cleaning intake valves and combustion chamber surfaces to reduce hot-spot pre-ignition, a particularly common problem with lower-octane Indian pump petrol. The result is a more complete, consistent fuel burn with every combustion cycle.

Dosage & Coverage

One 177 ml bottle is calibrated for bike tanks and small car tanks typically ranging from 8 to 35 litres. Add the entire contents to a nearly empty fuel tank, then fill with petrol as normal — no measuring, no mixing required. For best results, use every 3,000–5,000 km or at each service interval to prevent deposit build-up from India's variable pump fuel quality.

Compatibility

Safe to use with

• All petrol-powered bikes, scooters, and motorcycles — including Hero, Bajaj, Honda, TVS, and Royal Enfield models.
• Petrol cars and SUVs — Maruti Suzuki, Hyundai, Tata, Honda, Kia, Renault, and all other brands sold in India.
• Both carbureted and fuel-injected (FI) petrol engines.
• E10 and E20 ethanol-blended petrol grades as mandated in India.
• BS4 and BS6 emission-standard vehicles, including those with catalytic converters and O2 sensors.
• Turbocharged petrol engines — Maruti Baleno RS, Hyundai i20 Turbo, Tata Nexon Turbo, and similar.

Not suitable for

• Diesel engines — this is a petrol-only fuel additive; do not use in diesel vehicles.
• Engine oil or coolant systems — add to the fuel tank only.
• Heavily damaged or mechanically worn injectors that require professional replacement.

Why It Matters in India

Indian commuter bikes and small hatchbacks refuel at dozens of different petrol stations, encountering wildly inconsistent fuel quality — and since April 2023, mandatory E10 blending has introduced additional stress on older fuel system components. The summer heat across Indian cities (often exceeding 40 °C) accelerates varnish formation inside injectors, causing mileage and performance to slip faster than in cooler climates. Regular use of Rislone 44701 acts as affordable preventive maintenance — particularly important for BS6 vehicles where a failing injector can trigger check-engine warnings and costly sensor replacements. Think of it as a small investment every service interval that protects a much larger one.

How To Use

1. Shake the bottle gently before opening to ensure the formula is fully mixed.
2. Pour the entire 177 ml contents into your fuel tank before refuelling.
3. Fill the tank with petrol as normal and ride or drive immediately.
4. Allow the full tank to run through for best cleaning results — no idle time needed.

Safety Note: For fuel tank use only. Keep away from children. In case of skin contact, wash thoroughly with soap and water. Do not mix with diesel, engine oil, or coolant.

Frequently Asked Questions

Is one 177 ml bottle enough for my bike's tank?

Yes — 177 ml is the correct treatment dose for most Indian bike and scooter tanks ranging from 8 to 20 litres. For larger car tanks up to 35 litres, one bottle still provides an effective preventive cleaning dose; refer to the dosage chart on the bottle label for your exact tank size.

Can I use this at every service interval?

Absolutely — using Rislone 44701 every 3,000–5,000 km is a smart preventive practice, especially given variable Indian pump fuel quality and mandatory ethanol blending. Regular use costs far less than a single professional injector cleaning at a workshop.

Is it safe for my BS6 bike or car?

Yes, fully. The formula is confirmed safe for the catalytic converters and oxygen sensors fitted to all BS6-compliant vehicles. It will not damage or coat sensor surfaces, and it does not contain any compounds banned under BS6 emissions regulations.

Will it help me pass a PUC emission test?

Cleaner injectors produce a more complete fuel burn, which directly reduces unburnt hydrocarbon emissions and exhaust smoke — the two things inspectors measure at PUC centres. Many users report noticeably cleaner exhaust after a single treatment tank.

Is Cash on Delivery available, and how quickly will it arrive?

Yes — naredi.in offers Cash on Delivery and free shipping across India. Most orders are dispatched within 24 hours on business days; delivery typically takes 3–6 working days depending on your location.

Complete Your Kit

For comprehensive fuel system health, pair the 44701 with these Rislone products available exclusively through Naredi India:

• Rislone Hy-per Fuel Complete Fuel System Cleaner Petrol (44700): A full-system treatment that cleans not just injectors but also the fuel pump, carburettor passages, and upper cylinder — ideal as a deeper annual clean to complement your regular 44701 preventive top-ups.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available