Rislone 44701

Use When You Notice…

• Jerky throttle at low RPM: Partially clogged injectors disrupt fuel atomisation — this cleaner restores proper spray patterns for even combustion.
• Mileage quietly slipping: Deposit build-up from variable Indian pump petrol forces richer fuelling; clean injectors help recover lost km/l figures.
• Hard cold starts or rough idle: Varnish from ethanol-blended petrol restricts fuel flow at the injector tip — one treatment dissolves it rapidly.
• Engine knock or ping on pump fuel: Dirty injectors worsen combustion and amplify knock, especially on BS6 engines in bikes and hatchbacks.
• Upcoming PUC emission check: Cleaner injectors produce more complete combustion, reducing HC and CO output — ideal preparation before your emission test.

Key Benefits

• Injector Deposit Removal: Concentrated detergent chemistry dissolves light to moderate varnish and carbon fouling from injector tips in a single tank.
• Restored Throttle Response: Optimised fuel atomisation brings back the crisp, linear throttle feel that dirty injectors gradually steal away.
• Improved Fuel Efficiency: Clean injectors meter fuel precisely, helping recover km/l figures lost to deposit-induced rich fuelling on Indian pump petrol.
• Right-Sized for Indian Vehicles: The 177 ml bottle is the correct dose for bikes, scooters, and compact hatchbacks — no wastage, no guesswork.
• Preventive Maintenance at Low Cost: Regular use every 3,000 km keeps injectors clean and reduces the need for costly workshop cleaning services.

The Technology Inside

Rislone 44701 uses a highly concentrated polyetheramine (PEA) detergent blend specifically formulated for smaller fuel systems found in bikes, scooters, and compact Indian hatchbacks. Unlike diluted retail cleaners, this concentrated formula reaches injector pintle tips and intake valve stems quickly, breaking the molecular bonds that hold carbon and varnish deposits in place. The chemistry is fully compatible with modern BS6 fuel systems, oxygen sensors, and three-way catalytic converters — no sensor damage, no catalytic poisoning. Ethanol-compatibility means it works equally well with E10 and E20 blends now widely available at Indian fuel stations. Trusted by Indian mechanics and workshops who recommend it as a between-service injector maintenance treatment.

Dosage & Coverage

One 177 ml bottle treats bike tanks of 8–20 litres and small car fuel tanks up to approximately 35 litres — sized precisely for high-mileage Maruti, Hyundai, Tata, and Honda engines popular across India. Add the entire bottle to a nearly empty fuel tank before filling with petrol; the concentrated product mixes and circulates through the fuel system during normal riding or driving. For best results in Indian driving conditions — heat, dust, and stop-go city traffic — repeat treatment every 3,000–5,000 km or at every service interval.

Compatibility

Safe to use with

• All petrol-powered bikes, scooters, and cars — both carbureted and fuel-injected (FI) engines
• BS4 and BS6 compliant engines
• E10 and E20 ethanol-blend petrol available at Indian fuel stations
• Catalytic converters and oxygen (lambda) sensors
• Rubber fuel lines, seals, and modern fuel tank liners

Not suitable for

• Do not add to engine oil — for fuel tank use only
• Not for diesel engines or CNG/LPG systems
• Cannot fix mechanically worn injectors or damaged fuel pressure regulators

Why It Matters in India

Indian commuter bikes and small hatchbacks fill up across dozens of petrol stations — fuel quality varies significantly between branded and unbranded pumps, accelerating injector fouling. Indian summers push ambient temperatures to 42–48°C, causing fuel to vapourise unevenly and deposit residue faster on injector tips. Stop-start city traffic in Delhi, Mumbai, and Bengaluru means injectors are constantly cycling at low loads — the worst condition for deposit accumulation. A 177 ml bottle every few thousand kilometres is the most affordable way to protect engines in Indian driving conditions and keep km/l figures honest.

How To Use

1. Shake the bottle gently before opening.
2. Pour the entire 177 ml contents into a nearly empty petrol tank.
3. Fill the tank with petrol as normal and ride or drive immediately.
4. No idle time required — the product works during normal operation.

Safety Note: For fuel tank use only. Keep away from children. Do not mix with engine oil, coolant, or any other fluid system.

Frequently Asked Questions

Is one 177 ml bottle enough for my bike's tank?

Yes — 177 ml is the correct dose for most Indian bike and scooter tanks between 8 and 20 litres. For small hatchbacks up to 35 litres, one bottle is still sufficient. Check the dosage chart printed on the bottle for your exact tank size.

Can I use this product at every service interval?

Absolutely — regular use every 3,000–5,000 km is an excellent preventive practice given variable Indian pump fuel quality. It is safe for continuous periodic use and will not harm seals, sensors, or catalytic converters over time.

Will this help before my PUC emission test?

Yes. Cleaner injectors produce more complete combustion, which directly reduces hydrocarbon (HC) and carbon monoxide (CO) emissions measured during PUC checks. Add a bottle one full tank before your scheduled test for best results.

Is it safe for my BS6 bike or hatchback?

Rislone 44701 is fully compatible with BS6 fuel systems, including direct-injection and port-injection setups. It will not damage oxygen sensors, catalytic converters, or any emission-control components fitted to modern BS6 vehicles.

Is Cash on Delivery available and how fast will it arrive?

Yes — Cash on Delivery is available across India through naredi.in, with free delivery on all orders. Most orders are delivered within 3–6 business days depending on your location, including Tier 2 and Tier 3 cities.

Complete Your Kit

For a full fuel system refresh, pair the Rislone 44701 with these complementary products from the Rislone range available at naredi.in.

• Rislone Hy-per Fuel Complete Fuel System Cleaner Petrol (44700): A comprehensive full-system treatment that cleans injectors, carburettors, fuel lines, and intake valves in one dose — ideal for high-mileage vehicles or as a deeper annual clean alongside your regular bike fuel injector cleaner routine.

Warranty & Support in India

• Warranty: 1-year warranty against manufacturing defects
• Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
• Returns: 14-day return and exchange policy, COD returns accepted
• Delivery: Free delivery across India, Cash on Delivery available