RISLONE HIGH MILAGE POWER STEERING REPAIR 

High Mileage Power Steering Repair Rislone High Mileage “Kilometer” Power Steering Repair is a unique dual cavity bottle containing a combination of the best performance additives to repair the most common power steering fluid related problems. For many vehicles, this is your last chance before paying an expensive repair bill or replacing the vehicle. Power Steering Repair can be used to top-off the existing fluid when low, or add a bottle when changing fluid. Works on all vehicles, domestic and import. Compatible with ALL types of power steering fluid or ATF, including petroleum, mineral oil and synthetic formulas. Use one bottle to top off or restore fluid level.  World’s Most Trusted Repair Brand Since 1921 Dual Action Formula—Twice the performance  Safe And Easy To Use  Works To Seal & Stop Leaks Plus...   Restores Performance—Reduces noise and smoothes out hard steering.    •    •  •  Hi-Tech Additives  Viscosity Improvers  Friction Modifiers   Adds Protection—Stops leaks and reconditions rack & pinion.    •  •  •  Fluid Stabilizer  Lubrication Additives  Seal Conditioners  500 mL (16.9 fl oz)   The common element between all of the power steering components is the fluid. The fluid touches everything inside the pump, gearbox and rack & pinion. This fluid must lubricate, cool, clean and pressurize for the system to function. In newer systems, the power steering fluid can easily perform these functions. As the vehicle ages and gains more miles, the fluid alone can’t do the job. Internally, pumps whine, gears have play in them, valves stick, seals leak and the fluid quickly breaks down. When installed, Rislone High Mileage Power Steering Repair helps to stop and prevent these problems and enhances the useful life of your power steering system. The result is smoother steering with no leaks.  

INSTRUCTIONS:

Adding to existing Power Steering Fluid Using to seal leaks—Remove power steering dipstick and check reservoir fluid level. On most vehicles, the reservoir is on or near the belt driven power steering pump. Consult owners’ manual for location if needed. If fluid is low, pour equal amounts from the two chambers into reservoir.

At least half of bottle should be used. Do not overfill . Check fluid level again. Top off with manufacturer’s recommended power steering fluid as needed. Replace dipstick and drive 5 to 10 minutes to circulate fluid. To control slack, reduce noise & squeals, and smooth out hard & tight steering (morning sickness), the entire bottle should be used. 

TIP: If necessary to prevent overfilling, drain or siphon some power steering fluid from reservoir before using. Depending on the power steering problem, results will either be immediate or noticeable within (2) days or 150 km of driving. In seriously damaged power steering systems, a second treatment may be required. In this case, it is suggested that the power steering fluid be changed and a second application of Power Steering Repair be added. Changing Fluid If using Power Steering Repair when changing power steering fluid, add entire contents of bottle.

Then top off with manufacture’s recommended fluid to proper level. Drive vehicle and recheck fluid level. DOSAGE: One bottle is designed to treat 1 to 2.5 litres of fluid capacity, which is the normal size for most vehicles. For smaller systems from 0.4 to 0.9 litres, only use half bottle, pouring equal amounts from each side. For larger systems use one bottle for every 2 litres of capacity.