Rislone Engine Oil Treatment High-Mileage Vehicles
Free Shipping Across India
Pickup available at naredi.in
Usually ready in 1 hour
Description
Description
Rislone Engine Oil Treatment for High-Mileage Indian Vehicles
Engineered for India's extreme heat, dust and relentless stop-go city traffic — restoring protection where ageing engines need it most.
- Strengthens engine oil film to reduce metal wear during long traffic jams at 42–48°C ambient heat in Delhi, Mumbai and Bengaluru.
- Conditions worn seals and gaskets to slow or stop oil leaks common in high-mileage Maruti, Hyundai, Tata and Honda engines.
- Progressively cleans sludge and varnish deposits that restrict oil flow in engines running on extended service intervals.
- Compatible with mineral, semi-synthetic and full-synthetic oils — all standard Indian grades from 5W-30 to 20W-50.
- Rejuvenates ageing engines without costly workshop repairs — trusted by Indian mechanics and workshops nationwide.
Use When You Notice…
- Oil spots under your parked car: Seals and O-rings shrink with age and Indian summer heat; the seal conditioners in this Rislone oil treatment restore flexibility and reduce seepage over one oil-change interval.
- Ticking or tappet noise on startup: Degraded oil film allows metal-on-metal contact at cold start; this treatment restores protective viscosity quickly so noise typically reduces within a few hundred kilometres.
- Oil level dropping between services: Internal seepage and consumption signal worn seals — this high-mileage engine treatment slows oil loss significantly across a full service interval.
- Rough idle or reduced smoothness: Sludge restricting oil galleries causes uneven lubrication; the cleansing agents in this Rislone engine treatment dissolve deposits progressively without dislodging large chunks that could block oil ways.
- Unknown service history on a used vehicle: Second-hand Tata Nexon, Kia Seltos or Tata Punch owners benefit from a full conditioning treatment to baseline engine health before the next service.
Key Benefits
- Wear Protection in Indian Heat: Anti-wear chemistry maintains a robust oil film even during sustained idling at 45°C ambient — the daily reality in Indian city traffic.
- Seal Conditioning: Restores elasticity to aged rubber seals and O-rings, reducing the oil leaks that are especially common after India's summer months.
- Sludge and Varnish Removal: Detergent packages dissolve accumulated deposits in engines that have run on extended drain intervals — a widespread practice across India's Tier 2 and Tier 3 cities.
- Viscosity Stabilisation: Viscosity improvers prevent oil thinning under sustained high-temperature operation, keeping oil pressure steady during long traffic queues.
- Universal Oil Compatibility: Works with every standard Indian oil grade — 5W-30, 10W-40, 15W-40 and 20W-50 — in both petrol and diesel engines.
The Technology Inside
Rislone engine oil treatment combines three active technologies: polar-bonding anti-wear agents that cling to metal surfaces to form a sacrificial protective layer, polymer-based viscosity index improvers that prevent the oil from thinning excessively under India's high operating temperatures, and aromatic seal conditioners that reverse the hardening and shrinkage that heat cycles cause in rubber gaskets and O-rings. A mild detergent-dispersant package keeps loosened sludge particles in suspension so they exit with the old oil at drain — rather than forming blockages in narrow oil galleries. The formulation is calibrated for sustained 45°C-plus ambient conditions and the high dust ingestion rates characteristic of Indian roads, where abrasive silica particles accelerate ring and bore wear far faster than in temperate climates.
Dosage & Coverage
Add the contents of one bottle directly into the engine oil via the oil filler cap — either at the time of an oil change or as a mid-interval supplement between services. After adding, check the dipstick to confirm the total oil level remains within the safe upper and lower markers; do not overfill. One bottle treats engines up to approximately 5–6 litres of oil capacity, covering most Indian passenger cars including the Tata Punch, Kia Seltos, Maruti Swift and Honda City.
Compatibility
Safe to use with
- All petrol and diesel passenger car and SUV engines
- Mineral, semi-synthetic and full-synthetic engine oils
- All standard Indian oil grades: 5W-30, 10W-40, 15W-40, 20W-50
- CNG and LPG converted engines — where valve and ring wear is accelerated
- High-mileage Maruti, Hyundai, Tata, Honda, Kia and Toyota engines
Not suitable for
- Not a replacement for engine oil — always use alongside your regular engine oil
- Not recommended for engines under active manufacturer warranty where oil additives are explicitly prohibited
- Cannot repair mechanically damaged components — severe knocking requires workshop inspection
- Not formulated for 2-stroke engines or wet-clutch motorcycle gearboxes
Why It Matters in India
India's vehicle fleet skews older than most markets — millions of cars are running well past 1,00,000 km in conditions that degrade engine oil faster than anywhere in the world. BS6 fuel standards have reduced combustion contaminants, but the combination of 42–48°C summer heat, airborne dust from unpaved roads and near-daily stop-start traffic in cities like Delhi, Mumbai and Bengaluru continues to punish engine oil severely. Vehicles like the Tata Nexon, Kia Seltos and Tata Punch — often kept for a decade or more — benefit enormously from a targeted high-mileage engine treatment that extends service life without the cost or downtime of a workshop overhaul. Indian mechanics in Tier 2 and Tier 3 cities consistently recommend Rislone products precisely because they deliver visible, measurable results within a single oil-change interval.
How To Use
- Warm the engine for two to three minutes, then switch off and allow it to cool slightly.
- Open the oil filler cap and pour the entire bottle of Rislone engine treatment directly into the engine.
- Replace the cap securely, then check the dipstick to confirm oil level is within the safe range.
- Drive normally — the treatment works progressively over the full service interval.
Safety note: Do not overfill the engine beyond the maximum dipstick mark. If you are unsure of your engine's oil capacity, consult your owner's manual or ask your local mechanic before adding.
Frequently Asked Questions
Can I use this in a CNG or LPG converted engine?Yes — CNG and LPG conversions run hotter and leaner than petrol, which accelerates valve seat, ring and seal wear. Rislone engine oil treatment is well-suited to these applications and helps offset the accelerated wear these conversions introduce.
How long before I notice a difference?Tappet noise and cold-start clatter often reduce within a few hundred kilometres as the anti-wear and viscosity agents take effect. Leak reduction and full seal conditioning build progressively over one complete oil-change interval — typically 5,000–7,500 km under Indian driving conditions.
Is it safe for BS6-compliant engines in India?Yes — Rislone oil treatment is compatible with BS6 petrol and diesel engines. It does not interfere with modern engine management systems, catalytic converters or diesel particulate filters when used as directed.
Will this affect my PUC (Pollution Under Control) test results?Rislone engine treatment does not increase exhaust emissions; in fact, by reducing oil consumption and burning, it may help marginal engines pass PUC tests more comfortably. It is not, however, a substitute for a properly tuned engine if yours is already failing PUC.
Is Cash on Delivery available, and how quickly will it arrive?Yes — naredi.in offers Cash on Delivery across India, so you can pay on receipt with no advance payment required. Orders are typically dispatched within one business day, with delivery in 3–7 working days depending on your location.
Complete Your Kit
For comprehensive engine protection and repair, pair this treatment with these trusted Rislone products:
- Rislone Engine Treatment Conditioner and Cleaner (44102): A deeper-clean conditioning formula ideal as a first-step flush before switching to fresh oil in a heavily sludged high-mileage engine.
- Rislone One Seal Stop Leak (44334): Targets persistent external oil leaks at gaskets and seals — the ideal companion when oil spots under the car remain after one interval of engine oil treatment.
Warranty & Support in India
- Warranty: 1-year warranty against manufacturing defects
- Customer Support: Monday–Saturday, 9 AM–6 PM IST. WhatsApp / Phone: +91 93112 11157 · hello@naredi.in
- Returns: 14-day return and exchange policy, COD returns accepted
- Delivery: Free delivery across India, Cash on Delivery available
Complete Your Kit
Everything you need for complete vehicle care
- Keep your battery healthy: CTEK Battery Chargers →
- Check battery health: Battery Testers →
- Full vehicle diagnostics: OBD Diagnostic Tools →
- Emergency backup: Jump Starters →
Further Reading
Our guides will help you get the most out of this product.
- The Best Automotive Engine Treatment Tools for High-Mileage Indian Cars — Fix Oil Leaks and Steering Whine Before They Become a ₹50,000 Problem
- Cold Cranking Amps Explained: What Battery CCA Means and Why It Matters in Indian Winters
- Trickle Charger vs Smart Charger: Which One Should You Use for Your Car?
Shipping and Delivery
Shipping and Delivery
The estimated lead time is 2 -3 days, but naredi.in or its affiliates are not responsible for delays or damages by courier. Any damages during transit need to be reported within 24 hours of receiving the shipment. We will try our best to help you resolve the issue.
See More
Returns & Refunds
Returns & Refunds
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
See More


