If your Maruti Swift, WagonR or Hyundai i20 is returning noticeably fewer kilometres per litre than it used to, reaching for a fuel additive is a reasonable instinct. Before you do, it is worth understanding exactly what fuel additives for improving mileage can realistically fix, what belongs in a different category entirely, and when only a workshop visit will actually help. That clarity will save you money and frustration, regardless of which brand is on the shelf in front of you.
Key Takeaways
- Fuel additives for improving mileage primarily work by cleaning fuel-system components — injectors, intake valves and combustion chambers — that accumulate deposits over time.
- They cannot compensate for worn rings, failing oxygen sensors, a choked air filter or any mechanical fault. A symptom is not a diagnosis.
- Engine oil treatments are a separate product category. They address internal engine wear and leaks, not the fuel system itself.
- No independently verified mileage-improvement figures for any specific additive on Indian car platforms are available. Treat brand claims as unconfirmed until you verify them against independent testing.
- Reading the product label for compatibility with your fuel grade (petrol or diesel), dosage and interval is mandatory — not optional.
What Fuel Additives Actually Do — and What They Cannot
A fuel additive is a concentrated chemical formula you add to your fuel tank, typically before a fill-up, so it circulates through the fuel system as the engine runs. The most useful category for mileage concerns is the fuel system cleaner. Over tens of thousands of kilometres, petrol and diesel engines accumulate carbon deposits on fuel injectors, intake valves and combustion chamber surfaces. These deposits disrupt the precise spray pattern of an injector, reduce airflow past a valve and alter combustion efficiency. A quality fuel system cleaner is designed to dissolve or loosen these deposits gradually.
What this can plausibly restore is the efficiency that was already there but had degraded. It is not adding new performance — it is attempting to recover lost performance caused by contamination. If your engine is mechanically sound and the drop in mileage is deposit-related, a cleaner may help. If the cause is something else — a worn spark plug, a dirty air filter, low tyre pressure, an ageing oxygen sensor or a change in your driving pattern — a fuel additive for improving mileage will make no meaningful difference.
Some fuel additives also include moisture dispersants, which are useful if your tank sees condensation during heavy monsoon months. Others include fuel stabilisers, which are more relevant if a vehicle sits idle for extended periods. These address real but specific problems, not general mileage loss.
How to Choose a Fuel Additive for Improving Mileage: Decision Checklist
The Indian market has no shortage of fuel additive brands, and marketing language on the bottle is not evidence of performance. Work through this checklist before you buy anything:
- Has the mileage drop been sudden or gradual? A sudden drop often signals a specific fault — a faulty sensor, a clogged filter or a tyre issue — that needs diagnosis, not a treatment. A gradual decline over a long service life is more consistent with deposit build-up.
- Is the car overdue for a service? Fresh engine oil, a new air filter, clean spark plugs and properly inflated tyres should come before any additive. These have a known, predictable effect.
- Has the car thrown any warning lights? An OBD2 scanner like the Konnwei KW350 can read fault codes before you spend anything on treatments. A code is not a diagnosis, but it narrows the field considerably and helps you decide whether to treat or visit a workshop.
- What is the vehicle's history? High-mileage cars that have skipped services are better candidates for a fuel system cleaner than a well-maintained, recently serviced car with no other symptoms.
- Fuel compatibility: Confirm the product is designed for petrol or diesel — not all products cover both. Check the label states compatibility with BS6-grade fuel.
- Dosage and interval: Follow the stated dose for your tank capacity exactly. More is not better with most chemical treatments. Over-treating can harm seals or catalysts in some formulations. The label is your only reliable guide.
- What symptom does it target? A catalytic converter cleaner, an injector cleaner and an intake valve cleaner are not the same product. Match the product to the symptom.
- What it cannot do: No additive replaces a service, fixes a failed sensor or repairs worn mechanical components. If you have any doubt about the cause of your mileage drop, a workshop diagnosis is the safer starting point.
One product worth knowing about in the fuel and emissions cleaning space is the Rislone Cat Complete Fuel & Exhaust Emissions System Cleaner. This targets the fuel system and catalytic converter together, which can be relevant if your Maruti or Hyundai has accumulated deposits across a high-mileage service life. Check the product label to confirm compatibility with your fuel type and engine before use.
When an Engine Oil Treatment Is the Right Product Instead
Engine oil treatments are added to your engine oil, not your fuel tank. They are designed for a different set of symptoms: internal engine wear, oil consumption, minor seal weeping or a noisy top end on a high-mileage engine. They do not clean fuel injectors. Equally, a fuel system cleaner will not address an oil leak or worn valve seals.
If your Hyundai Creta or Maruti Vitara Brezza has covered significant kilometres and you are noticing increased oil consumption, slight weeping from gaskets or a noticeably noisier engine on cold starts, that is the territory where an engine oil treatment becomes relevant — not a fuel additive for improving mileage.
The Rislone High Kilometre Formula with Steering Stop Whine & Leak Repair is an engine oil treatment aimed at high-mileage vehicles. It is added to the engine oil (or power steering fluid, per label instructions), not the fuel. It addresses internal wear-related symptoms — oil leaks, noisy steering and seal degradation — that commonly appear as a vehicle ages. This is not a fuel efficiency product in the direct sense. Whether it is appropriate for your car's specific symptoms and oil grade requires checking the product documentation against your owner's manual.

The practical point: if your mileage concern is accompanied by symptoms like oil consumption or engine noise, an oil treatment may address underlying wear that is contributing to inefficiency. If the engine is mechanically healthy and mileage has simply dropped gradually, a fuel system cleaner is the more logical starting point.
Frequently Asked Questions
Will a fuel additive guarantee better mileage on my Maruti or Hyundai?
No product can guarantee a specific mileage improvement. A fuel system cleaner may help restore efficiency lost to deposit build-up, but results depend on the actual cause of the drop. No independently verified, model-specific mileage data for any additive on Indian car platforms has been published that we can cite. Treat brand claims with healthy scepticism and verify them independently.
How do I know if my mileage drop is a fuel system issue or a mechanical one?
A gradual decline over high mileage with no warning lights and a well-maintained car is more likely deposit-related. A sudden drop, warning lights, rough idling or misfires point to a specific fault. An OBD2 scanner or workshop diagnosis should identify that fault before you try any additive. Additives are not a diagnostic tool.
Can I use a fuel additive and an engine oil treatment at the same time?
They go into different systems, so there is no direct conflict. However, check each product's label for any stated restrictions, and do not use multiple additives of the same type simultaneously. Do one treatment at a time so you can assess what, if anything, changed.
How often should I use a fuel system cleaner?
Follow the interval stated on the specific product label — this varies between brands and formulations. Do not assume a universal interval. The manufacturer's guidance is the only reliable reference for the product you have purchased.
Is the Rislone High Kilometre Formula a fuel additive for improving mileage?
No — this is an engine oil treatment, not a fuel additive. Its suitability depends on your engine oil type, the symptoms you are experiencing and the guidance in the product documentation. Check the label and, if needed, confirm with the supplier before use.
Next Step
If your Maruti or Hyundai has covered significant kilometres and you are seeing a gradual mileage decline — rather than a specific fault — exploring a quality fuel system cleaner is a reasonable next step. Start with the basics first: service, filters and tyres. Then match the product to your specific symptom rather than buying the most heavily marketed bottle on the shelf.
If deposit build-up across the fuel system and catalytic converter seems like the likely cause, the Rislone Cat Complete is worth reviewing. If wear-related oil symptoms are accompanying the mileage drop, the Rislone High Kilometre Formula addresses that separate concern. Read the label carefully for each and confirm it matches your car's actual symptom before adding anything to your tank or sump.
Shop the Products in This Article
Check product details and suitability before choosing.
